by MSI » Thu Jun 24, 2021 12:00 pm
Q: Is there a Crush BEV/Crash3 option in the software?
A: Yes.
In the update
First you need to imput your measured damage:
from 3D Graphics select the icon in bottom left corner
- 3D Option for crush measurements.png (11.74 KiB) Viewed 1718 times
That brings up the dialog for inserting the locations of POI & POR and also the damage measurements
- target damge and locations.png (30.86 KiB) Viewed 1718 times
then when you run msmac3D it calculates the CRASH3 DeltaV based on the CRASH3 tables
select the View menu from 3D Graphics
at top in middle
- View Menu location.png (82.81 KiB) Viewed 1718 times
Then select Run Summary
- Run Summary menu option.png (10.16 KiB) Viewed 1718 times
And at the bottom is a summary of CRASH3/BEV deltav calculations and results
- CRASH3 deltav calcs on Run SUmmary.png (36.38 KiB) Viewed 1712 times
Note to use input A.B you have calculated or obtained
- simply insert input card 89:
If from Medit3D GRID mode:
- to use you have to insert input cards 80 & 85 for damage measurements and clock direction
- input 80 85.png (7.88 KiB) Viewed 1718 times
you can also add the target impact and rest positions
And note the automatic calc of AKV is in the update/upgrade
- input card 89.png (53.07 KiB) Viewed 1718 times
We have also updated the lsqfit option
To access to calc A, B use
From 3D graphcis see see
HOWTO Calculate CRASH3 A & B Coefficients, AKV (for SMAC) for how to calculate customized A & B Coefficients and AKV
- If from medit3D GRID mode
- Use the Tools menu:
- Tools menu from medit3D Grid for lsqfit.png (10.16 KiB) Viewed 1715 times
Q: Is there a Crush BEV/Crash3 option in the software?
A: Yes.
In the update
[list][url=https://www.mchenrysoftware.com/board/viewtopic.php?f=45&t=1081]Preliminary v3.3 uploaded for licensees only[/url] so use your login/password, which includes updates to the crash test database, how to videos, etc
Also be sure to see the recent topic:
[list][*][url=https://www.mchenrysoftware.com/board/viewtopic.php?f=55&t=1811]HOWTO Calculate CRASH3 A & B Coefficients, AKV (for SMAC)[/url][/list]
[/list]
First you need to imput your measured damage:
from 3D Graphics select the icon in bottom left corner
[align=center][attachment=6]3D Option for crush measurements.png[/attachment][/align]
That brings up the dialog for inserting the locations of POI & POR and also the damage measurements
[align=center][attachment=4]target damge and locations.png[/attachment][/align]
then when you run msmac3D it calculates the CRASH3 DeltaV based on the CRASH3 tables
[list](see [url=https://www.mchenrysoftware.com/board/viewtopic.php?f=55&t=1811]HOWTO Calculate CRASH3 A & B Coefficients, AKV (for SMAC)[/url] for how to calculate customized A & B Coefficients and AKV.
[/list]select the View menu from 3D Graphics
at top in middle
[align=center][attachment=5]View Menu location.png[/attachment][/align]
Then select Run Summary
[align=center][attachment=3]Run Summary menu option.png[/attachment][/align]
And at the bottom is a summary of CRASH3/BEV deltav calculations and results
[align=center][attachment=0]CRASH3 deltav calcs on Run SUmmary.png[/attachment][/align]
Note to use input A.B you have calculated or obtained
[list]simply insert input card 89:
[/list]If from Medit3D GRID mode:
[list]to use you have to insert input cards 80 & 85 for damage measurements and clock direction
[align=center][attachment=7]input 80 85.png[/attachment][/align]
you can also add the target impact and rest positions
[/list]
And note the automatic calc of AKV is in the update/upgrade
[align=center][attachment=2]input card 89.png[/attachment][/align]
We have also updated the lsqfit option
To access to calc A, B use
From 3D graphcis see see [url=https://www.mchenrysoftware.com/board/viewtopic.php?f=55&t=1811]HOWTO Calculate CRASH3 A & B Coefficients, AKV (for SMAC)[/url] for how to calculate customized A & B Coefficients and AKV
[list]If from medit3D GRID mode
[list]Use the Tools menu:
[align=center][attachment=1]Tools menu from medit3D Grid for lsqfit.png[/attachment][/align]
[/list][/list]