Page 1 of 1

Preliminary Validation msmac3D Videos

Posted: Sun Nov 23, 2014 7:28 pm
by MSI
msmac3D Validation:
  • See how well msmac3D correlates with full scale crash tests!
    We are near completion of our development of 3D graphics for our updated interface to the msmac3D simulation program.
    Here are some sample preliminary validation comparison videos:
We expect to post several other full scale crash test comparisons with our msmac3D simulation program soon.
We are also in the process of preparation of a msmac3D validation paper comparing or simulation model with other measured metrics from the full-scale crash tests (accelerations, roll & pitch responses, yaw responses, etc.).

Re: Preliminary Validation msmac3D Videos

Posted: Mon Nov 24, 2014 3:22 pm
by MSI

Re: Preliminary Validation msmac3D Videos

Posted: Wed Nov 26, 2014 12:43 pm
by MSI
Demonstration/Validation of msmac3D simulation reconstruction SNAG Option which provides for a SUPPLEMENTARY IMPULSIVE CONSTRAINTS ON RELATIVE MOTION (interlocking of vehicle structures).
The SNAG option is only available from McHenry Software.
For documentation on the SNAG option see Here is a sample preliminary validation comparison videos with 2002 SCARS Test 2:

Re: Preliminary Validation msmac3D Videos

Posted: Mon Dec 22, 2014 7:18 pm
by MSI
We've close to completing the 3D graphics for our msmac3D program and are almost ready for release.
We've added a link to a video compilation of validation tests and comparisons we recently made of some samples projects we've been working testing and refining the graphics and simulations.
http://youtu.be/vUEzVUINUJc?list=PLBh3OTTiCozN1HLcEZRXsszyMeSNSgR-N
Hope you all have a very pleasant and relaxing holiday break.

brian

Re: Preliminary Validation msmac3D Videos

Posted: Mon Dec 29, 2014 1:03 pm
by MSI
Be sure to Thank you for your interest in McHenry Software!