Cards 30,31,32 Example: Polygon friction zone option

 

The following example demonstrates the input format for the m-smac Polygon friction zone option. (The input cards are taken from the m-smac input file ADVSAMP2.Si5 which is contained in the project file ADVSAMP2.prj). In this example, the Polygon friction zone is a high friction zone located in the 1^st quadrant.

 

The following are the card inputs for the polygon friction zone option:

 

 1.      11.     1.00                                                          30

 546.    186.    362.4   198.    283.    228.    224.    271.               0  31    

 188.    311.    151.    396.    130.    540.    116.    708.               1  31    

 99.     756.    540.    756.    546.    186.                               2  31    

 

The following is an echo of the card inputs for the polygon friction zone option:

 

 POLYGON FRICTION TABLE NO.   1 XMU =    1.000

 

      X,Y POLYGON COOR          X,Y POLYGON COOR          X,Y POLYGON COOR          X,Y POLYGON COOR   

   NO.    XBPX    YBPY       NO.    XBPX    YBPY       NO.    XBPX    YBPY       NO.    XBPX    YBPY   

    1   546.00   186.00       2   362.40   198.00       3   283.00   228.00       4   224.00   271.00  

    5   188.00   311.00       6   151.00   396.00       7   130.00   540.00       8   116.00   708.00   

    9    99.00   756.00      10   540.00   756.00      11   546.00   186.00

 

 

 

---

Cornering Stiffness Table Example