Tchange1

Tint1

Tchange2

Tint2

Tchange3

Tint3

Tchange4

Tint4

1

1

Card:  Field

Variable

Description

Original Units

Metric Units

1:1

Tchange1

When using the smacthp or SMACO options, during the time of interest the print interval must be 0.001 seconds. However, if the impact point, which is normally the time of interest, is at T=1 or T=2 seconds, the program must run entirely at 0.001 seconds. It is for this situation that we added the print interval change option.

The time at which the 1^st print interval (Tint) is to be changed

(If set to 0., 1^st print time interval is set to Tint1)

seconds

1:2

Tint1

1^st Print interval

seconds

1:3

Tchange2

The time at which the 2^nd  print interval (Tint) is to be changed

seconds

1:4

Tint2

2^nd Print interval

seconds

1:5

Tchange3

The time at which the 3^rd  print interval (Tint) is to be changed

Seconds

1:6

Tint3

3^rd  Print interval

Seconds

1:7

Tchange4

The time at which the 4^th  print interval (Tint) is to be changed

Seconds

1:8

Tint4

4^th Print interval

Seconds

1:9

Not used.

1:10

SEQ

Set = 1