In 3D graphics there are a few tools which will help you display a scaled side/front or top view
set to wire-form, added grid in 1 foot increments, see below for HOWTO:
- set grid.jpg (101.26 KiB) Viewed 1246 times
first i suggest you clone your project and eliminate or move out of view other vehicles and the roadway (so only plain color background)
Then add a plain color background and set the color:
- change color of plain background.jpg (34.14 KiB) Viewed 1246 times
then change color of plain background and sky:
- select ground plain color.jpg (17.45 KiB) Viewed 1246 times
change sky/zero plane/etc color (in example i set all to white)
- set sky color.jpg (108.2 KiB) Viewed 1234 times
menu to change lighting to brighten:
- set veh position.jpg (31.33 KiB) Viewed 1246 times
Using side and (top/bottom arrows) and lence (field of view) to zoom/show:
- select veh opt 2.jpg (53.86 KiB) Viewed 1246 times
BTW if veh get lost/out of sight, use select veh menu to adjust position and bring into view:
- set side view and field of view.jpg (7.52 KiB) Viewed 1246 times
Once you select a vehicle, use vehicle position icon to move into view:
- set light to brighten vehicvle display.jpg (57.39 KiB) Viewed 1246 times
Optionally add/Set grid size and x y or z grid:
- side top view.jpg (151.16 KiB) Viewed 1246 times
and here's to set wireframe view:
- set wireframe view.jpg (106.47 KiB) Viewed 1246 times
In 3D graphics there are a few tools which will help you display a scaled side/front or top view
set to wire-form, added grid in 1 foot increments, see below for HOWTO:
[align=center][attachment=9]side top view.jpg[/attachment][/align]
first i suggest you clone your project and eliminate or move out of view other vehicles and the roadway (so only plain color background)
Then add a plain color background and set the color:
[align=center] [attachment=3]select ground plain color.jpg[/attachment][/align]
then change color of plain background and sky:
[align=center][attachment=2]change color of plain background.jpg[/attachment][/align]
change sky/zero plane/etc color (in example i set all to white)
[align=center][attachment=0]set sky color.jpg[/attachment][/align]
menu to change lighting to brighten:
[align=center][attachment=4]set light to brighten vehicle display.jpg[/attachment][/align]
Using side and (top/bottom arrows) and lence (field of view) to zoom/show:
[align=center][attachment=5]set side view and field of view.jpg[/attachment][/align]
BTW if veh get lost/out of sight, use select veh menu to adjust position and bring into view:
[align=center][attachment=6]select veh opt 2.jpg[/attachment][/align]
Once you select a vehicle, use vehicle position icon to move into view:
[align=center][attachment=7]set veh position.jpg[/attachment][/align]
Optionally add/Set grid size and x y or z grid:
[align=center][attachment=8]set grid.jpg[/attachment][/align]
and here's to set wireframe view:
[align=center][attachment=1]set wireframe view.jpg[/attachment][/align]