Is there a Crush BEV/Crash3 calc option in msmac3D?

software related notices, mainly for licensees who should laso see the LICENSEE ONLY sections
Post Reply
MSI
Site Admin
Posts: 1792
Joined: Thu Jun 18, 2009 12:37 pm

Is there a Crush BEV/Crash3 calc option in msmac3D?

Post by MSI »

Q: Is there a Crush BEV/Crash3 option in the software?

A: Yes.
In the update First you need to imput your measured damage:
from 3D Graphics select the icon in bottom left corner
3D Option for crush measurements.png
3D Option for crush measurements.png (11.74 KiB) Viewed 79 times
That brings up the dialog for inserting the locations of POI & POR and also the damage measurements
target damge and locations.png
target damge and locations.png (30.86 KiB) Viewed 79 times
then when you run msmac3D it calculates the CRASH3 DeltaV based on the CRASH3 tables select the View menu from 3D Graphics
at top in middle
View Menu location.png
View Menu location.png (82.81 KiB) Viewed 79 times
Then select Run Summary
Run Summary menu option.png
Run Summary menu option.png (10.16 KiB) Viewed 79 times
And at the bottom is a summary of CRASH3/BEV deltav calculations and results
CRASH3 deltav calcs on Run SUmmary.png
CRASH3 deltav calcs on Run SUmmary.png (36.38 KiB) Viewed 73 times
Note to use input A.B you have calculated or obtained
  • simply insert input card 89:
If from Medit3D GRID mode:
  • to use you have to insert input cards 80 & 85 for damage measurements and clock direction
    input 80 85.png
    input 80 85.png (7.88 KiB) Viewed 79 times
    you can also add the target impact and rest positions
And note the automatic calc of AKV is in the update/upgrade
input card 89.png
input card 89.png (53.07 KiB) Viewed 79 times
We have also updated the lsqfit option
To access to calc A, B use
From 3D graphcis see see HOWTO Calculate CRASH3 A & B Coefficients, AKV (for SMAC) for how to calculate customized A & B Coefficients and AKV
  • If from medit3D GRID mode
    • Use the Tools menu:
      Tools menu from medit3D Grid for lsqfit.png
      Tools menu from medit3D Grid for lsqfit.png (10.16 KiB) Viewed 76 times
LINKS: LATEST TOPICS, Info on LEASE pricing, Forum Index, McHenrySoftware.com,
Question? Comment? Please email us (all communications considered confidential)
(c)McHenry Software, Inc ALL Rights Reserved.
Post Reply