The value for the Steer and/or Braking Tables type can be 1, 2 or >2
- 1 is standard the table is interpreted as input
- 2 Sets Pre-impact/Post Impact drag and/or steer as the first two entries
- additional post impact entries can also be added and will be adjusted/set per the detected time of impact
- >3 is where you can have pre-impact steering and/or braking and use the detect contact to interpolate on to post impact steering and braking
EXAMPLES: DETECT CONTACT TABLE OPTIONS
The following examples demonstrate using the DETECT CONTACT option
- DETECT CONTACT Example#1 Table type = 2.0 (pre/post impact)
- DETECT CONTACT Example#2: Type=2.0 Multiple Changes to steer/brake after impact
- DETECT CONTACT Example#3: Type>2.0 Pre-Impact Steer
- DETECT CONTACT Example#4: Type>2.0 Pre-Impact Steer & Braking