- The first thing you need to do is input the EDR data to msmac3D.
- This is made especially easy now with our Sequential Inputs for Steer, Braking/Accel, Velocity in 3D Graphics.
- You simply click on the a vehicle, select the Steer, Accel/Decel, Velocity tab, enter the EDR data for direct simulation and comparison with simulation
The SPeed1 & Speed2 are the msmac3D Simulation Speeds
the SEQ are the EDR measured valocities Below is the original calculated acceleration from the EDR Velocities (Every 1/2 second calculate change in speed and divide by 0.5 seconds)
the AXX1 & AXX2 are the accelerations required to match the measured EDR Velocities (see prior diagram)