## The Major Shortcoming of Simplified Momentum Simulation and Analysis

General Questions related to the Momentum Based Analysis programs
#pc-crash #virtualcrash #crash
MSI
Posts: 2305
Joined: Thu Jun 18, 2009 12:37 pm

### The Major Shortcoming of Simplified Momentum Simulation and Analysis

Jan 13, 2021: This message I repeated in a few posts so decided to split it off as a separate topic:
These comments apply to any crash analysis in general and simplified momentum analysis in particular which include a major simplifying assumption when applied to motor vehicle crashes.

The major shortcoming when applying some simplified momentum solutions in equations or simulations:
• There are many programs out there with good options & graphics:
• A word of caution to be very careful as momentum and some simplified momentum crash simulation programs include the simplifying assumption of an 'instantaneous exchange of momentum' which requires the user select a subjective 'point and angle' for that assumed instantaneous exchange
begs question: if so easy, why isn't it automatic?
These programs are useful however they can be very sensitive in many impact configurations.
ALWAYS CHECK FOR SENSITIVITIES OF ANY RESULTS!

Simplified momentum equations and programs which include this simplifying assumption require the user to pick a point and angle/direction to instantaneously exchange the momentum of a vehicular crash.
• The full exchange of momentum in any vehicular crash takes 50-150 milliseconds (or more).
• These programs/equations which include the simplifying 'instantaneous exchange' assumption consider a crash a SINGLE 'instant' (less than 0.001 second!) AND require the user select some subjective point and angle for the momentum exchange.
• See SAE 97-0949 and others which demonstrate the movement between point of impact (POI) and point of separation(POS) in collisions.
• Here is a simple illustration from the 1997 paper which is based on real world tests.
Also see RICSAC97 SAE 97-0961 and other 'real world' tests which demonstrate vehicle move and rotate between POI and POS.
sample POI to POS movement.png (33.58 KiB) Viewed 9826 times
This also means DO NOT use these simplified momentum solution procedures for side-slap collisions
Main point: Real world collisions take time (50-150 ms or more) and have changes in positions and orientations
• When applying a momentum solution with the simplifying assumption it is very subjective and random HOW and WHERE a user places/sets the LOCATION and the ANGLE/DIRECTION for the INSTANT of the momentum to be "instantaneously exchanged"
How do you best approximate the reality of 50 to 150 or more milliseconds aka "instants" during a collision interaction as a SINGLE INSTANT with a SINGLE angle/direction?
• Simplified momentum program vendors need to prepare OBJECTIVE instructions on these subjective random inputs for placing and directing the "point of momentum exchange"
• Their current instructions like "place at point of maximum engagement" and/or "fit the damage areas together like a puzzle" are extremely subjective and random.
• To be more honest about it they should add to their instructions "You should randomly and subjectively adjust the point and angle for the 'instantaneous exchange' until you get the answer you want and need!!'
THAT would be more honest!
• The validations for these programs use the BEST approximation for the random and subjective momentum exchange POINT and ANGLE/DIRECTION to get the best possible MATCH of the KNOWN results.
• They have done 'sensitivity studies' on these programs which interestingly use the SAME 'point and angle' arbitrarily and subjectively determined in their 'validations' and leave THAT out of the sensitivity study...
• In other words they don't vary the 'point and angle' for the instantaneous exchange which would demonstrate the major issue which can occur with a BAD point and angle for the 'point of instantaneous exchange'.
• The instructions ignore the fact that vehicles have different stiffness and restitution properties and so the residual damage in a crash MAY NOT BE a good indication of the maximum damage and engagement of the vehicles during the crash
Also how do you approximate a SINGLE angle/direction for that SINGLE point/instant to approximate all 50-150 or more milliseconds/instants of changing positions and directions (see this video for an example!)?
IF it is so SIMPLE...

WHY NOT...

make it AUTOMATIC!
For additional information please also see Some Momentum Misconceptions

#### This topic has 5 more posts with additional information To Read more, Please login and/or register. 2024 NOTE: Soon ALL Technical Sections will be ONLY for registered users. Optionally you can email us forum@mchenrysoftware.com your Name, Company, Location, a Username, and a Password (which you can change) and we will register you and send you a confirmation email.

• Similar Topics
Replies
Views
Last post