How to DIsplay/Print a Scaled Side or Top View of a 3DModel?

[MSI]

In 3D graphics there are a few tools which will help you display a scaled side/front or top view
set to wire-form, added grid in 1 foot increments, see below for HOWTO:

side top view.jpg

first i suggest you clone your project and eliminate or move out of view other vehicles and the roadway (so only plain color background)
Then add a plain color background and set the color:

select ground plain color.jpg

then change color of plain background and sky:

change color of plain background.jpg

change sky/zero plane/etc color (in example i set all to white)

set sky color.jpg

menu to change lighting to brighten:

set light to brighten vehicle display.jpg

Using side and (top/bottom arrows) and lence (field of view) to zoom/show:

set side view and field of view.jpg

BTW if veh get lost/out of sight, use select veh menu to adjust position and bring into view:

select veh opt 2.jpg

Once you select a vehicle, use vehicle position icon to move into view:

set veh position.jpg

Optionally add/Set grid size and x y or z grid:

set grid.jpg

and here's to set wireframe view:

set wireframe view.jpg